MSO44B 4-BW-1500 Tektronix

MSO44B 4-BW-1500 Tektronix

The FBM247, Channel-Isolated Current/Voltage Analog/Digital/Pulse I/O Module contains eight channels which can be individually configured for a range of analog, digital and pulse field I/O signals.Each I/O channel is galvanically isolated from other channels and ground.Three types of passive termination assemblies are available for the FBM247:
 DIN rail mounted TA, similar to those used with the other 200 Series FBMs                                                                                                                                                                                                                                                                                                                                          Baseplate-mounted TA (RH101KA), which provides field I/O wiring support for one FBM247,as shown in Figure 1. This TA mounts directly onto the FBM247’s field I/O connector on the 200 Series baseplate.
 Baseplate-mounted TA (RH924WG), which provides field I/O wiring support for two FBM247s in paired slots (that is, in positions 1 and 2, 3 and 4, 5 and 6, or 7 and 8), as shown in Figure 2. This TA mounts directly onto the field I/O connectors on the 200 Series baseplate.

MSO44B 4-BW-1500 Tektronix

MSO44B 4-BW-1500 Tektronix

The FBM247 can serve as a HART communications field device host, enabling the Foxboro Evo™ system to request and receive two digital messages per second from the field device. The message passthrough capability can be used to support HART universal, common practice, and device-specific commands, but not the burst communication mode.These commands are implemented using the Intelligent Field Device Configurator FoxCom™ and HART™ Protocols (IFDC — refer to PSS 21S-8A3 B3 for details) or PACTware (Process Automation Configuration Tool – refer to PSS 2A-1Z3 G for details).The FBM247 must be used with I/A Series® system software, v8.7 to v8.8 and Foxboro Evo Control Core Services software, v9.0 or later.When used with the baseplate-mounted TAs, there is no need for a separate termination or marshalling enclosure. When installed in G-Series or equivalent system enclosures with baseplate-mounted TAs, the FBM247 enables the system enclosure to support up to 96 FBMs and their associated Field Control Processors (FCP) from a single enclosure’s footprint.Refer to G-Series Enclosures Overview (PSS 31H2GOV) or equivalent PSS for a complete list of modules supported in the system enclosures.

MSO44B 4-BW-1500 Tektronix

MSO44B 4-BW-1500 Tektronix

Key features of the FBM247 are:
 Eight individual isolated channels to support:
• HART Analog Input (AI)/Analog Output (AO) 4-20 mA
• 0-20 mA AI/AO, non-HART
• 0-10 V and 0-5 V AI, non-HART
• Digital dry contact sense 24 V dc
• Discrete voltage monitor, configurable 0 and1 thresholds 0-10 V
• NAMUR sensor discrete input -Signal level according to DIN EN 50227
(NAMUR):
– “On” at 2.1 mA dc with short circuit detection at > 6 mA
– “Off” at 1.2 mA dc with open detection at<0.25 mA
• Pulse count, frequency, acceleration and jerk, contact sense or voltage input
• Discrete Output 24 V, 20 mA current or solid state switch output.

MSO44B 4-BW-1500 Tektronix

♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!

Related models:

UFC721BE101 3BHE021889R0101
UFC760BE01 3BHB007030R0001
UFC760BE143 3BHE004573R0143
UFC760BE41 3BHE004573R0041
UFC760BE42 3BHE004573R0042