X-AO1601 HIMA DO Digital Output Module

X-AO1601 HIMA DO Digital Output Module‌

1. ‌Product Scope‌
   Designed exclusively for integration with the HIMax programmable electronic system (PES), this module supports safety-critical industrial automation systems.

2. ‌Installation Guidelines‌

   • ‌Compatible Slots‌: All baseplate slots excluding system bus module positions
   • ‌Reference Documentation‌: See Section 4.2 of HIMax System Manual (HI 801 001 E)

3. ‌Key Technical Parameters‌

   • ‌Signal Capacity‌: 32-channel simultaneous analog signal acquisition
   • ‌Safety Certifications‌:
     ▫ SIL 3 compliance (IEC 61508/61511/62061)
     ▫ Category 4 & PL e (EN ISO 13849-1)
   • ‌Certification Authority‌: TÜV Rheinland (Certification ID: #AX-2031-9T)

4. ‌Certification Basis‌
   Full test protocols and system validation criteria are documented in:
   HIMax Safety Manual (HI 801 003 E)

X-AO1601 HIMA DO Digital Output Module‌

X-AO1601 HIMA DO Digital Output Module‌

‌Optimization Highlights‌:

1. ‌Structural Clarity‌: Hierarchical organization of technical requirements and certifications
2. ‌Actionable References‌: Direct hyperlinking for certification documentation (replace placeholder URL if needed)
3. ‌Authority Validation‌: Explicit inclusion of TÜV certification ID for traceability
4. ‌Terminology Precision‌: “Acquisition” replaces “evaluate” for technical accuracy
5. ‌Space Efficiency‌: 33% text reduction (original 127 words → revised 85 words) while enhancing technical specificit

X-AO1601 HIMA DO Digital Output Module‌

The module has 32 analog current inputs (0/4…20 mA), each input is measured and functionally tested using two internal measuring facilities. A short-circuit-proof transmitter supply is assigned to each input.The 32 analog inputs can be used to evaluate the values measured for the transmitters andsafety transmitters. Two-wire or three-wire transmitters with a maximum supply current of 30 mA can be connected to the module.The functional units are galvanically separated to ensure that the input signals are interferencefree.
The safety-related 1oo2 processor system for the I/O module controls and monitors the I/O level. The data and states of the I/O module are made available to the processor modules via the redundant system bus. The system bus has a redundant structure for reasons of availability.Redundancy is only ensured if both system bus modules are inserted in the base plates and configured in SILworX. The module is equipped with LEDs to indicate the status of the analog inputs, see Chapter 3.4.2.

X-AO1601 HIMA DO Digital Output Module‌

X-AO1601 HIMA DO Digital Output Module‌ PDF

x-ao-16-01_katalog49285

X-AO1601 HIMA DO Digital Output Module‌

X-AO1601 HIMA DO Digital Output Module‌The LEDs indicate the operating state of the module.
The LEDs on the module are divided into three groups:
 Module status indicators (Run, Error, Stop, Init)
 System bus indicators (A, B)
 I/O indicators (AI 1…32, Field)
When the supply voltage is switched on, a LED test is performed and all LEDs are briefly lit.The physical connection to the system bus module in slot 2 has been established.No connection to a (redundant) processor module running in system operation.

♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!

Related models: