ELAU iSH100/30044/0/0/00/0/00/11/00 Servo Motor

ELAU iSH100/30044/0/0/00/0/00/11/00 Full English Product Specification
Basic Product Information
Brand: ELAU (Schneider Electric Subsidiary)
Full Model / Order Part No.: iSH100/30044/0/0/00/0/00/11/00
Product Name: PacDrive iSH100 Integrated Servo Motor with Electromagnetic Holding Brake
Place of Origin: Germany
HS Code: 8501530000
Series: ELAU PacDrive iSH All-in-One Servo Series
Mounting Standard: IEC 100mm square front flange installation
Physical Specifications
Mounting Flange: 100 mm × 100 mm IEC square flange
Overall Dimension: 100 mm (W) × 100 mm (H) × 315 mm (L) (brake extended length)
Net Weight: 4.1 KG
Shaft Spec: Standard smooth output shaft without keyway
Housing: Die-cast aluminum alloy, passive natural convection cooling
Protection Class: IP65 for motor body and circular connectors
Connectors: Dual industrial round plugs (3-phase power + SERCOS encoder communication)
Built-in Component: Rear-end integrated electromagnetic holding brake assembly
Status Indicator: Front LED for power, bus link, fault and brake release status

Electrical Input Specifications
1. Main 3-Phase Power Input: AC 380–480V, 50/60Hz
2. Rated Main Input Current: 4.2 Arms
3. Standstill Main Input Current: 5.1 Arms
4. Auxiliary Control Input: 24VDC for encoder circuit and brake coil
5. Brake Coil Input: 24VDC, rated coil current 0.35A
6. Winding Insulation Class: Class F
7. Operating EnvironmentWorking Temperature: 0°C ~ +55°C
Storage Temperature: -20°C ~ +70°C
Humidity: 5%–95% non-condensing, no corrosive gas
8. EMC Compliance: EN 61000-6-2 industrial anti-interference standard
Mechanical & Electrical Output Interfaces
Mechanical Performance Output
Continuous Rated Speed Output: 3000 rpm
Standstill Torque Output: 4.4 Nm
Peak Overload Torque Output: 13.6 Nm (3.1× continuous torque)
Rated Continuous Power Output: 1.38 kW
Rotor Moment of Inertia: 0.82 kg·cm²
Brake Static Holding Torque Output: 6.2 Nm
Communication & Diagnostic Signal Output
1. SERCOS III Real-time Bus Output: Digital servo bus for high-speed motion data exchange with PacDrive controller
2. Absolute Encoder Feedback Output: SinCos single-turn encoder closed-loop position signal to internal drive
3. Brake State Switch Output: Digital feedback signal of brake engaged/released status
4. Multi-channel LED Diagnostic Output: Visual alarm for overheat, overcurrent, bus disconnection and brake failure
5. Internal Drive Power Output: Onboard power amplifier output to drive motor stator windings, no external servo drive required
6. Reserved Digital I/O Signal Output: Pins for limit switch and home sensor signal transmission
Core Technical Parameters
Motor Type: Permanent Magnet Synchronous AC Servo Motor
Pole Pairs: 3 pairs
Torque Constant: 0.61 Nm/A
Voltage Constant: 48 V/(kr/min)
Max Peak Current: 15.8 Arms
Encoder Type: Battery-free single-turn SinCos absolute encoder
Cooling Mode: Fanless natural air cooling
Compatibility: Fully compatible with all ELAU PacDrive 3G/4G motion controllers
Key Feature: Electronic nameplate automatic recognition, power-off safety brake for gravity load protection