REM615E_G HBMBCAAJNEA1BBN1XG ABB Motor Protection and Control IED

ABB REM615E_G HBMBCAAJNEA1BBN1XG Product Introduction and Technical Specifications
Brand: ABB
Model: REM615E_G, ordering code HBMBCAAJNEA1BBN1XG
Full Product Name: REM615E Motor Protection and Control IED, Relion® 615 Series
Country of Origin: Finland
HS Code Reference: 85372090 (For customs reference only; confirm classification with local customs authority before declaration)
Overall dimension: 216 mm × 180 mm × 160 mm
Net weight: Approximately 2.15 kg

Electrical Specifications
Auxiliary supply voltage: 24–250 V DC / 100–240 V AC wide range
Nominal measuring current for CT input: 1 A or 5 A selectable
Nominal measuring voltage for VT input: 100 V AC / 110 V AC
Rated operating frequency: 50 Hz / 60 Hz
Binary input operating voltage: 24–250 V DC
Binary output contact rated capacity: 250 V AC, 5 A resistive load
Power consumption: Maximum 20 W
Operating temperature range: -20 °C to +70 °C
Storage temperature range: -40 °C to +85 °C
Front panel protection class: IP54; rear terminal area protection class: IP20
Main Characteristics
Comprehensive motor protection functions including thermal overload (49M), locked rotor protection (51LR), phase overcurrent (50/51), earth fault protection (51G), negative sequence overcurrent (46), undercurrent protection (37), phase reversal protection (46R) and undervoltage/overvoltage protection;
Supports disturbance recorder, multi-level event log and fault waveform storage for post-fault analysis;
Built-in trip circuit supervision, CT circuit monitoring and complete hardware self-diagnosis;
Multiple communication protocols supported: IEC 61850, Modbus, DNP3 and IEC 60870-5-103;
Dual Ethernet communication interfaces support PRP and HSR redundant network;
Withdrawable plug-in design with integrated CT shorting function to guarantee safety during module replacement;
Embedded graphical local HMI, supporting single line diagram display and multi-language menu;
Flexible signal matrix and user-defined logic function blocks to adapt various site control requirements;
Supports IRIG-B, SNTP and IEEE 1588 time synchronization;
Complies with international EMC standards for anti-interference performance in industrial substation environments;
Supports flush mounting, semi-flush mounting and rack mounting inside control cabinets;
Suitable for main protection and control of asynchronous motors in industrial power distribution, energy and process automation systems.